Device designed for stripping insulation from cables.
Working range of the wire stripper: 0.2 - 6.0 mm² (10 - 24 AWG)
multifunctional, reinforced device, with rubberized handle and hardened blades
mechanism: frontal, automatic
in the stripping process it automatically adjusts to the cross-section of the cable being worked on
has an additional cutter and end crimper
stripper with adjustable stripping length
length: 205 mm
weight: 0.30 kg
Crimping of connector lugs:
insulated: 0.5 - 6 mm² (22-10 AWG),
uninsulated: 4 - 6 mm² (12-10 AWG), 1.5 - 2.5 mm² (16-14 AWG), 05 - 1mm² (22-18 AWG).
- -The INSULATION PULLER is a practical tool for quick and precise removal of insulation from single or multicore cables. To remove the insulation, insert the wire into the jaws so that it sits flush against the tool - then squeeze the handle.
- -CABLE CUTTING TOOL - another function of the wire stripper is to cut wires. The 11 mm long blade is located between the handles of the tool. To cut a cable of similar or smaller width, simply place it between the blades and squeeze firmly.
- -CONNECTOR END CAPSULE - With the tool, you can crimp insulated and non-insulated connector ends onto conductors of wires with a cross-section from 1.5mm2 to 6mm2. Simply insert the conductor with the stripped end and insert it into the connector terminal, then place it in the crimping location
- -PRECEPTION OF PRESSURE FORCE + LIMITER - the device has a dial which is located under the jaws. With it you can adjust the amount of pressure on the insulation, so you don't have to worry about damaging the cable while working.