Colad Underbody Coating, M80 Grey, 1l

Name: Colad Underbody Coating, M80 Grey, 1L
Brand: Colad
SKU: 3858475
Price: 15.92 EUR
Availability: OutOfStock

Temporarily out of stock

Overview

Benefits of Undercoating M80

The coating offers excellent protection against climatic influences and against gravel and stone chips
Very good adhesion to a wide range of substrates
Very good resistance of weather influences spray water and abrasion

Technical features of Undercoating M80

Packaging 1 L. tin with spray connection
Packaging Unit Box of 12 x 1 L.
Shelf life 2 years (store between 10°C and 20°C)
Usage ± 0.7 kg/m2 or ± 0.7 litre/m2
Basic material Solvents, resins, rubbers and fillers
Consistency Liquid, good sag resistance
Specific density (20°C), DIN 51757 Ca. 1.03 kg/litre
Temperature resistance (cured) -25°C till +80°C
Resistant (20°C), cured Water, salt spray, oil, soft bases and acids
Dry to touch (20°C, 65% RH) Ca. 45 min. (±700 μ wet)
Completely dried (20°C, 65% RH) Ca. 2 hours (±700 μ wet)
Forced drying (60°C) Ca. 45 min. (± 700 μ wet)
Paintability (20°C, 65% RH)
2 component high solids Possible after drying, primer recommended
Base coat system Possible after drying
Water based system Possible after drying
Salt spray test (DIN 50021)
Up to 480 hours, Ri 0 at 350 μ dry layer thickness
Up to 720 hours, Ri 0 at 350 μ dry + paint
Gravel test (SAE-J400 method) 6A – 6B at 350 μ dry layer thickness
Bending test (DIN 53152, +70°C) No cracks, no loss of adhesion
Bending test (DIN 53152, -30°C) Minor cracks, no loss of adhesion
Substrates
Adheres well (without pretreatment) on a wide range of clean, dry, dust- and grease free substrates. It is advisable to perform an adhesion test before starting

Preparation and Application of Undercoating M80

Can be applied as stone chip and anti-corrosion coating
On bumpers, front and rear aprons, doorsills and chassis. And as a sound-deadening product in wheel-housings
For cars, trucks and coaches
Shake before use
The surfaces to be treated must be clean, dry, rust-, dust- and grease free
Can be applied by an Undercoating Spray Gun with an air-pressure of 3-6 bar
Recoated without bleeding
Over-painted (depending on the layer thickness, temperature and humidity), after about 60 to 90 minutes, with most of the commonly used conventional 2K- and base coat lacquers. When a 2Klacquer is used, we advise to first use a layer of primer and to paint over after this layer has completely dried
Optimum spraying distance: 30 cm
Cleaning contaminated surfaces and equipment: in ‘fresh’ condition with solvents